Can I mine Ravencoin and Monero at the same time?

Yes, you can mine Ravencoin and Monero at the same time on one computer. The usual setup puts your graphics card to work on Ravencoin and your processor on Monero, using two separate mining programs. It can work well, but you need to leave enough power, cooling, and system resources for both.

How the two jobs fit together

The coins use different mining algorithms—the sets of calculations your computer performs to help secure each network.

• Ravencoin uses KAWPOW, which is mainly suited to a graphics processing unit, or GPU.
• Monero uses RandomX, which favors your computer’s central processing unit, or CPU.

Because they mainly use different parts of your computer, you can often run them together without cutting either mining speed dramatically. But they still share memory, cooling, electricity, and some processor time.

This is not merged mining, where the same mining work helps secure multiple networks. You are running two independent jobs. Each has its own wallet address, mining settings, and rewards.

What you need to set up

You normally need a Ravencoin-compatible GPU miner and a Monero-compatible CPU miner. Download mining software from its official project source, and never give it your wallet’s recovery phrase—the secret words that let someone control your funds.

For each coin, you will also need:

• A receiving address for that specific coin.
• A mining pool, if you are not mining alone. A pool combines miners’ work and shares rewards.
• Separate settings for the resources each program can use.

Make sure your Ravencoin miner supports your GPU and that the card has enough dedicated graphics memory for KAWPOW’s growing mining dataset. Check current requirements rather than relying on an old hardware guide.

If you use browser-based Monero mining, the same CPU-and-GPU split may be possible alongside a separate Ravencoin program. However, browser performance and the service’s actual mining method matter. Do not assume a browser tab matches the efficiency of a dedicated Monero miner.

Keep the miners from slowing each other down

Start each miner separately and note its hashrate, meaning how many mining calculations it completes per second. Then run both and compare.

Avoid assigning every available CPU thread—a slot for running processor work—to Monero immediately. Your operating system and GPU miner still need processor time.

RandomX benefits from about 2 MB of L3 cache per mining thread. L3 cache is a small, fast memory area inside your processor. Its fast mode also uses a dataset of about 2,080 MB, plus additional memory overhead. Adding threads beyond your computer’s useful limits can make performance worse.

Watch for:

• Lower mining speeds or rejected work reported by your pools.
• A sluggish desktop or crashes.
• Higher temperatures and constantly loud fans.
• Power use that exceeds your power supply’s safe capacity.

Reduce CPU threads or GPU power settings if needed.

Check whether the extra work pays

Mining both coins does not automatically mean more profit. Compare the extra rewards with the extra electricity, pool fees, and heat.

Measure total power use at the wall if possible. Use a live mining calculator with your measured speeds and local electricity rate; estimates change with coin prices and network competition.

The bottom line

You can mine Ravencoin on your GPU and Monero on your CPU simultaneously. Test each alone first, leave room for shared resources, and keep the combined setup only if its extra rewards justify its extra costs.